![]() | Bespoke Handmade Mattresses & Bed Bases Telephone 01507 358092 ODD SIZE MATTRESSES AND BED BASES |
You will find information below, but if you need any further guidance, then please don’t hesitate to call and we can talk it through.
HOW DO I MEASURE? (for a traditional iron, brass or wooden bedstead)
With your bed assembled, the width is measured from the outside of one side rail, across to the outside of the other side rail. The length is measured from the inside of the headboard post to the inside of the footboard post. On some wooden beds, such as sleigh-beds, the frame will have a recess for the base to fit into. You will need to measure the inside of this recess to obtain both the width and the length.
A QUICK PRICE GUIDE
The best way to find out a price is to simply give us a call. However, below is a quick price guide.
If your width and/or length is smaller than a standard size, add 10% to that price.
If you width and/or length is greater than a standard size, then go to the next size up and use that price.
N.B. – If your measurements are only slightly non-standard, then the price increase may be minimal, if at all.
CUT OUT CORNERS – PLEASE ADD 10%
These occur mainly with four-posters and half-testers.
ROUNDED BOTTOMS – PLEASE ADD 10%
These occur mainly with Continental beds, mainly French and Italian, where the footboard is curved.
FOR ANY OTHER REQUIREMENTS OR ADVICE, PLEASE CONTACT US.

VAT Registration Number 463 1266 59